Quality workshop lathe suitable for a wide range of turning and drilling applications. Features power feed for even surface finish and thread cutting. Four-way tool post mounted on compound slide mechanism enables fast interchange of cutting tools with accurate feed. Powered by 550Watt motor through six-speed gearbox. Incorporates quiet running PTO gearbox with oil bath lubrication for power feed. Supplied with three-jaw chuck, and dead centre. Fitted with no-load voltage release switch. Fully guarded to CE safety of machinery regulations 98/37/EEC and covered by EMC directive 89/336/EEC and Low Voltage directive 79/23/EEC. Workshop stand available as an optional extra.
Specifications
- Model No: SM27
- Centre Height Over Table: 150mm
- Centre Height Over Saddle: 80mm
- Distance Between Centres: 500mm
- Spindle Bore: Ø26mm
- Speed Range:160 – 1600rpm
- Head Stock Taper: MT4
- Tail Stock Taper: MT3
- Tail Stock Travel: 40mm
- Screw Cutting
- Metric Pitch Qty: 14
- Metric Pitch Range: 0.5 – 3mm
- Inch Pitch Qty: 20
- Inch Pitch Range:11 – 40tpi
- Motor Power: 550W
- Supply: 230V
