Wacker Neuson BH 55rw Petrol Concrete Breaker
Product Information
The specialist for track construction
The BH 55rw gasoline demolition hammer provides ideal conditions for use in track construction, because railroad ballast must always be reworked to maintain the railway network. The tamping requires a rather gentle force, because the ballast may not be damaged during tamping. However, a certain percussion rate is required so that the ballast is properly compacted. The BH 55rw offers this combination. The "rw" ending here stands for "railway" and refers to the 1,350 blows per minute with 55 joules of single stroke impact energy. It is an ideal combination of percussion rate and power for the special requirements on the track.
This machine is not supplied with tools - point shown for illustration purposes only.
Features
- 55 joules of single stroke impact energy
- 1,300 blows per minute
- Specially designed for use in track costruction
- 4.5 m/s hand-arm vibrations
Specifications
- Length x width x height 898 x 492 x 346mm
- Part No. 5100004042
- Weight without tool 26kg
- Shank 32 X 160mm hex
- Percussion rate 1350 blows/min
- Single stroke impact (measured at tip of tool) 55 J (mkp)
- Wacker Neuson WM80 2-stroke petrol engine
- Fuel tank capacity 1.8 litres
- Fuel consumption 0.9 litres per hour